Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter

Model: Fiat Scudo MK 2 - Years 2007-2016
Part: Cabin air filter

The cabin air filter is located in the engine compartment, centrally, just below the windscreen. Open the front bonnet and locate the air duct housing, characterised by a large gasket around the edge. Unscrew the screws securing the upper portion of the duct to remove it and access the cabin air filter housing. Remove the old filter, eliminate any dirt residue, and insert the new filter (activated carbon filters are recommended), orienting it according to the airflow direction indicated by the arrows.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Cabin Air Filter Replacement
Cabin Air Filter Replacement
Fiat Scudo (2007-2016 / MK 2) The cabin air filter is located in the engine compartment, just below the windscreen, in a central position; to access the air duct and thus the filt…
How to replace the rear license plate bulb on a Fiat Scudo
How to replace the rear license plate bulb on a Fiat Scudo
Fiat Scudo (1996-2007 / MK 1) Before starting with the replacement, we will go to open the rear door of the load compartment, so that you can work without hindrance. So let's star…
Instructions for Replacing Number Plate Light
Instructions for Replacing Number Plate Light
Fiat Scudo (2007-2016 / MK 2) To replace the number plate light bulb, you need to remove the internal trim panel of the tailgate. This panel is secured with push fittings that hav…

Other guides you may be interested in

How to Remove the Left External Wing Mirror of a Volkswagen Polo

Let's see how to remove the left external wing mirror of a Volkswagen Polo (driver's side): remove the door panel (if necessary); use a lever to remove the internal trim of the mirror (there are plastic clips) and undo the securing bolts with a socket wrench. Once the securing bolts are removed: take out the mirror along with the adjustment electrical cables (manual wires) from the car door. To reassemble: refit the mirror with the bolts, the adjustment cables, and the plastic trim into the door panel. Finally, test the correct operation of the mirror.

Watch the video!


by ScegliAuto

More videos