Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Decommissioning a Fiat Punto Mk1 Before Scrapping

Model: Fiat Punto MK 1, 176 - Years 1993-1999

When an old car is to be scrapped, it must first be decommissioned, meaning all elements that could pose an environmental risk if released must be removed, as well as those that can be immediately recycled. Start by draining fluids such as engine oil, power steering fluid, coolant, and fuel. Next, remove the wheels, separating the tyres from the rims, detach the catalytic converter from the exhaust pipe, remove the battery, and finally, take out the complete engine with the gearbox. Before sending the chassis to the compactor, remove the windscreen by cutting the sealant and the rear heated window.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Wiper Motor from a Fiat Punto
How to Remove the Front Wiper Motor from a Fiat Punto
Fiat Punto (1993-1999 / MK 1, 176) Before you can start, you must open the front bonnet. Next, begin by removing the wipers and the corresponding grille to gain access to the motor. On…
How to Remove the Front Seat of a Fiat Punto
How to Remove the Front Seat of a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Before you start, open the front door of your Fiat Punto. Begin by unscrewing and removing the Torx screws that secure the seat rails to the car. Nex…
How to Replace the Auxiliary Belt on a Fiat Punto
How to Replace the Auxiliary Belt on a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Before starting, exit the cabin of your Fiat Punto and lift the front end using a ramp or jack. Begin by loosening the tensioner that holds the auxil…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the inertia switch on the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - How many km does the Fiat Punto run in reserve? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos