Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Airbag from a Fiat 500X Sport

Model: Fiat 500 500 X - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Airbag

See other generations:
Video tutorial

Let’s see how to remove the airbag from a Fiat 500X Sport: remember to always disconnect the negative terminal of the battery before performing these operations. Pry on the sides of the steering wheel to remove the screw covers, then remove the radio control from the steering wheel by disconnecting the electrical connector from behind.

Using a small screwdriver, apply upward pressure until the airbag module comes out from above. Still using a small screwdriver, disconnect the electrical connector, and the airbag module is finally free, allowing you to remove it for any necessary servicing.


Updated on 9 August 2026 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel Airbag on a Fiat 500X
How to Remove the Steering Wheel Airbag on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) How to remove the steering wheel airbag on a Fiat 500X? In this video, you will see how to proceed. Before removing the steering wheel, disconnect th…
How to replace the steering wheel airbag of the Fiat 500X
How to replace the steering wheel airbag of the Fiat 500X
Fiat 500 (2014-2022 / 500 X) In this guide we will see the instructions that will allow us to disassemble and replace the steering wheel airbag of the Fiat 500X. In this case, th…
How to remove the steering wheel airbag of the Fiat 500X
How to remove the steering wheel airbag of the Fiat 500X
Fiat 500 (2014-2022 / 500 X) To remove the steering wheel airbag of the Fiat 500X car, we need to insert a flat-tipped screwdriver into the right side hole, in order to push the …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos