Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing a Car Radio in the Fiat Panda

Model: Fiat Panda 319, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Car stereo

See other generations:
Video tutorial

If you want to install a car radio in a Fiat Panda that doesn’t have this accessory, you can do it yourself. Use a plastic lever to detach the tray from the dashboard's mounting.

Behind it, you will find the cables to connect to the unit. Open the packaging of the new car radio and retrieve the metal frame, inserting it where the tray was, ensuring the cables pass through.

Bend the tabs along the edge to secure it. Connect the antenna cable, which may require an adapter found in the kit, insert the electrical connector into its housing, and push the car radio into the frame until it clicks into place.


Updated on 11 August 2026 by ScegliAuto


Related tutorials

How to install the radio of the Fiat Panda 2
How to install the radio of the Fiat Panda 2
Fiat Panda (2003-2012 / 169, MK 2) After removing the car radio from its slot, installing a new radio on a Fiat Panda model 2 vehicle is a simple and quick operation to be carried out …
How to Replace the Radio in a Fiat Panda
How to Replace the Radio in a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you start, sit in the driver’s seat of your Fiat Panda. Begin by inserting the extraction keys into the holes on the front of the radio. This …
How to install a 2 DIN car radio in the Fiat Panda?
How to install a 2 DIN car radio in the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To install a 2 DIN car radio in the Fiat Panda 169, first remove the old car radio and detach the glove compartment from the passenger side. This wil…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos