Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Timing Chain

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Timing belt

See other generations:
Video tutorial

Removing the timing chain requires good general mechanical knowledge and, above all, the availability of the appropriate tools for correct timing; start by disconnecting the battery and removing the engine air filter box; drain the oil and coolant; remove the particulate filter and the turbo; take off the oil sump and the engine side support; remove the auxiliary belt and the water pump; then apply the appropriate jigs to hold the camshaft in position and remove the timing chain cover; fit the jig to the crankshaft pulley, remove the hydraulic tensioner, and then the toothed gear from the camshaft to complete the removal of the chain.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

Guide to replacing the timing chain on the Fiat Punto 1.3 Multijet
Guide to replacing the timing chain on the Fiat Punto 1.3 Multijet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide will show you the main steps to remove and replace the timing chain on the Fiat Punto 1.3 Multijet. To access the timing chain, first remo…
How to Replace the Timing Chain on a Fiat Punto Evo?
How to Replace the Timing Chain on a Fiat Punto Evo?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the timing chain on a Fiat Punto Evo, open the bonnet to access the components in the engine bay. On the left side of the engine block, th…
Replacing the Timing Chain on a Fiat Grande Punto 1.3 MultiJet
Replacing the Timing Chain on a Fiat Grande Punto 1.3 MultiJet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, you will see the main steps to remove and replace the timing chain on a Fiat Grande Punto 1.3 MultiJet. First, open the bonnet of your…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos