Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the timing chain on the Fiat Punto 1.3 Multijet

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Timing belt

See other generations:
Video tutorial

This guide will show you the main steps to remove and replace the timing chain on the Fiat Punto 1.3 Multijet. To access the timing chain, first remove the cylinder head cover; remove the drive belt and engine mount, then take off the cover on the timing side.

Now remove the valve cover by unscrewing all the fixing screws and disconnecting the various pipes; remove the crankshaft pulley to subsequently remove the timing chain, following the video tutorial until the end for disassembly!


Updated on 22 August 2026 by ScegliAuto


Related tutorials

Replacing the Timing Chain of the Fiat Punto 1.3 MultiJet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide outlines the main steps to remove and replace the timing chain of the Fiat Grande Punto 1.3 MultiJet, as well as the Fiat Panda and Fiat 5…
Guide to Replacing the Timing Chain on the Fiat Grande Punto 1.3 MultiJet
Guide to Replacing the Timing Chain on the Fiat Grande Punto 1.3 MultiJet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide shows how to remove and replace the timing chain on the Fiat Grande Punto 1.3 MultiJet, as well as the Punto Evo. Start by opening the bon…
Replacing the Timing Chain on a Fiat Grande Punto 1.3 MultiJet
Replacing the Timing Chain on a Fiat Grande Punto 1.3 MultiJet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, you will see the main steps to remove and replace the timing chain on a Fiat Grande Punto 1.3 MultiJet. First, open the bonnet of your…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos