Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

When to Replace the Timing Belt on Fiat 500 1.4 Petrol

Model: Fiat 500 312 - Years 2007-2024
Part: Timing belt

The timing belt plays a crucial role, synchronising the opening and closing of the valves with the pistons' up and down movement. It is therefore essential to ensure that the belt is always efficient, as its failure could cause severe engine damage. For this reason, it should be replaced within 75,000 miles or 5 years to avoid deterioration of the rubber. During installation, it is absolutely vital to keep the timing references perfectly aligned while tensioning the belt using the appropriate tensioner.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How and when to change the timing belt of the Fiat 500 1.2?
How and when to change the timing belt of the Fiat 500 1.2?
Fiat 500 (2007-2021 / 312) This guide provides instructions on how and when to change the timing belt of the Fiat 500 with a 1.2 engine. The timing belt for this type of engine…
How to Replace the Timing Belt on a Fiat 500?
How to Replace the Timing Belt on a Fiat 500?
Fiat 500 (2007-2024 / 312) Today, tackle the replacement of the timing belt on your Fiat 500. First, open the bonnet and remove the air filter assembly along with the engine co…
How and when to replace the timing belt on the Fiat 500 1.2
How and when to replace the timing belt on the Fiat 500 1.2
Fiat 500 (2007-2024 / 312) The information provided in this guide will allow you to remove and replace the timing belt on the Fiat 500 1.2; the timing belt should be replaced e…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2021 - When to replace the Abarth 500 timing belt? Read answer
    • 500 2007-2024 - How often should the Abarth 500's timing belt be replaced? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos