Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Replacement of the cabin air filter of the Fiat 500.

Fiat 500 - Video tutorial

Model: Fiat 500 500 E - Years 2020-2024
Part: Air filter
Operation: Replacement of the cabin air filter of the Fiat 500.

One of the operations included in a Fiat 500 service is the replacement of the air filter. To do this, we open the hood of the engine compartment, we will find the filter box in front of us in the center of the engine. We unscrew the two side screws that hold it in place with a 10mm wrench, disconnect the inlet tube, and remove the box. Using a 7mm wrench, we unscrew the filter cover and open it. This allows us to remove the old filter element and replace it with a new one. We close the cover and secure it with its screws. When repositioning the filter box, we pay attention to the fittings in its housing, and once it is properly positioned, we lock it with the two screws.


Posted on 13 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 500 2012-2021 - Where is the cabin filter located in the Fiat 500? Read Answer
    • 500 2014-2022 - Where is the Fiat 500x cabin air filter located? Read Answer
    • 500 2014-2022 - Costs for replacing engine and passenger compartment air filters for Fiat 500 x mjt? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos