Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter

Model: Fiat Stilo MK 1 - Years 2001-2010
Part: Cabin air filter

Changing the pollen filter in your car is very important; it protects you from external agents entering the cabin and helps the vehicle's ventilation system "breathe" better. Additionally, it is crucial to replace it at regular intervals to maintain the health of the driver and passengers. It is advisable to replace the filter every 6,200 miles or once a year. This operation is usually quite simple and can be done in about 10-15 minutes. The filter is located under the glove compartment. Once you locate its position, proceed with the replacement.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Air Filter on a Fiat Stilo
How to Remove the Air Filter on a Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) When servicing the car, do not forget the cabin air filter. Here’s how to change it on a Fiat Panda. The cabin filter is located at the bottom left o…
How to Replace the Cabin Air Filter on a Fiat Stilo
How to Replace the Cabin Air Filter on a Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) Before you start, open the front passenger door of your Fiat Stilo. Begin by removing the lower right side cover of the centre tunnel, releasing the …
Replacing Cabin Filter on Fiat Stilo
Replacing Cabin Filter on Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) In this video, you will see how to remove the cabin filter from a Fiat Stilo. First, get inside the cabin and remove the plastic panel located at the…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos