Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulbs in the Fiat Ducato van?

Model: Fiat Ducato X250 - Years 2006-2014
Part: Headlight bulb

In this tutorial, we can see how to replace the front headlight bulbs in the Fiat Ducato van, a very simple and quick operation. First of all, make sure that the key is not inserted, then remove the panel above the headlight by unscrewing the corresponding screws. Repeat the operation for the lower side, unscrew the two indicated bolts, and separate the headlight from the frame. At this point, we can open the large rear cap, disconnect the power connector, and unlock the metal clip. To install the replacement and reassemble everything, just follow the reverse procedure.

Posted on 1 February 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the low beam bulbs in the Fiat Ducato van?
How to replace the low beam bulbs in the Fiat Ducato van?
Fiat Ducato (2006-2014 / X250) In this tutorial we can see how to disassemble the headlights in the Fiat Ducato van and replace the bulbs. Before proceeding, make sure that the key…
Disassembly of the headlight assembly of the Fiat Ducato.
Disassembly of the headlight assembly of the Fiat Ducato.
Fiat Ducato (2014-2024 / X290) Briefly, we will see the instructions that will allow us to disassemble and replace the front headlight and its bulbs of the Fiat Ducato. First, we o…
How to replace the low beam bulb on Fiat Ducato
How to replace the low beam bulb on Fiat Ducato
Fiat Ducato (2014-2024 / X290) How to replace the light bulb on fiat Ducato? We lift the front hood to begin with, find the rear of the headlight and remove the plastic cover cap. …

Other guides you may be interested in

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos