Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset tire pressure on a Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part:

In this tutorial, we are explained how to reset the tire pressure warning light on a Fiat 500. Therefore, to reset this light there are no specific procedures to follow as there may be for other vehicles, we simply need to inflate the tire, or tires, to the correct pressure as indicated by the manufacturer and then drive the car at around 24 km/h until the pressure light disappears. The correct tire pressure may vary depending on temperature and load, this pressure is indicated on a sticker located on the driver's side door pillar.

Posted on 22 March 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the Fiat 500?
Fiat 500 (2007-2024 / 312) In order to reset the tire pressure warning light on the Fiat 500, you need to inflate the tires until they reach the recommended pressure value: thi…
How to reset the tire pressure warning light on the Fiat 500e
How to reset the tire pressure warning light on the Fiat 500e
Fiat 500 (2020-2026 / 500 E) Following the instructions in this guide, we will see how to reset the tire pressure warning light (TPMS) of the Fiat 500e; before performing the res…
How to reset the tire pressure light on the Fiat 500
How to reset the tire pressure light on the Fiat 500
Fiat 500 (2007-2024 / 312) The tire pressure warning light that appears on the instrument panel indicates a possible puncture or loss of pressure in one or more tires; let's se…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos