Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the Fiat Panda

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Service warning light

Today, we will discover the steps that will show you how to reset the service light for the regular maintenance oil change on the Fiat Panda. First, get in the vehicle and turn on the instrument panel; then press and hold the accelerator pedal for sixty seconds, subsequently pressing the brake pedal seven times, as shown in the video. At this point, turn off the ignition and wait another sixty seconds, then turn on the ignition and the engine; this will definitively reset the service light from the instrument panel!

Updated on 21 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Fiat Panda
How to reset the service light on the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Performing the reset of the service light of the Fiat Panda model 3 is very simple, this operation can be done independently by following these steps…
How to Reset the Service Light on a Fiat Panda
How to Reset the Service Light on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) The service light reset on a Fiat Panda vehicle can be performed via the OBD port and a diagnostic computer. To carry out this type of reset, connect…
How to manually reset the tyre warning light on the Fiat Panda 3 Cross
How to manually reset the tyre warning light on the Fiat Panda 3 Cross
Fiat Panda (2012-2026 / 319, MK 3) If the tyre warning light appears on the dashboard of your Fiat Panda Cross Mk3 (2012-2023) despite no loss of pressure, don't worry as this is an er…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2003-2012 - What to do when the service warning light comes on on the Fiat Panda 169? Read answer
    • Panda 2012-2026 - How do you reset the Fiat Panda Service warning light? Read answer

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos