|
Do it yourself
| |||
| ||||
How to Change the Oil on a Fiat Doblò MK1
Model: Fiat Doblo
Doblo 1, MK 1, 223
- Years:
2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Video tutorial
Watch this video to learn how to change the oil on a Fiat Doblò MK1: first, remove the oil filler cap, then go underneath the vehicle and remove the sump plug so that the oil can drain into a container, which you will dispose of at an authorised centre. Next, locate the filter, remove its cover, and inside you will find the plug with the filter inside; you will also need a container to let the oil drain from the filter. Remove the gasket from the cover and replace the filter, fitting a new gasket that you will lubricate well with new oil. Refit it into the cover, and while the oil drains, close the sump with a new plug and a new gasket (also well lubricated with new oil) and top up the oil from the top. You will need just under 3.2 litres of oil; do not pour it all in, but fill until the dipstick reads between MIN and MAX. Start the engine until the oil warning light goes out, then recheck the oil level. Top up if necessary.
Updated on 4 October 2026 by ScegliAuto
Related tutorials
Fiat Doblo
(2022-2026 /
Doblo -3)
In this video, we will see how to change the oil and oil filter on the third version of the Fiat Doblò 1.4: the filter is located at the front of the…
Fiat Doblo
(2000-2009 /
Doblo 1, MK 1, 223)
In this video, we see how to change the oil filter on a Fiat Doblo 1: first, we need to open the oil filler cap and lift the car, then get a basin to…
Fiat Doblo
(2000-2009 /
Doblo 1, MK 1, 223)
In this video, you will see how to carry out the routine maintenance service for an oil change, replacing the engine oil and oil filter on the first …
Other guides you may be interested in |
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.024
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |