Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Glow Plugs on a Fiat Bravo MultiJet

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Spark plugs

See other generations:
Video tutorial

In this video, you can see how to change the glow plugs on a Fiat Bravo 2 MultiJet (the procedure is the same for Alfa Romeo 147/156, Lancia Lybra and Delta, and Fiat Stilo and Doblò). The video shows that the glow plug is irreversibly burnt, so you need to replace it with a new one. You can find a kit of 4 glow plugs on eBay with the code 302962076848, priced at £40.99 plus £5 delivery.

Replacing them is not very easy as they are located in a difficult access area; do not overtighten, just tighten slightly. Refit the glow plug cap and then remount the EGR valve using a 13mm spanner, perhaps after cleaning it a bit, as the one in the video was in terrible condition.


Updated on 16 October 2026 by ScegliAuto


Related tutorials

How to replace the diesel filter of the Fiat Bravo 1.6 MultiJet
How to replace the diesel filter of the Fiat Bravo 1.6 MultiJet
Fiat Bravo (2007-2014 / Bravo 2) Below we will discover the steps that will allow us to disassemble and replace the diesel filter of the Fiat Bravo 1.6 MultiJet. First, we open the h…
How and When to Replace the Timing Belt on the Fiat Bravo 1.6 MultiJet
How and When to Replace the Timing Belt on the Fiat Bravo 1.6 MultiJet
Fiat Bravo (2007-2014 / Bravo 2) In this guide, you will learn how and when to replace the timing belt on the Fiat Bravo 1.6 MultiJet. The timing belt replacement on a small capacity…
Replacement of the timing belt for the Fiat Bravo 1.9 MultiJet.
Replacement of the timing belt for the Fiat Bravo 1.9 MultiJet.
Fiat Bravo (2007-2014 / Bravo 2) The main steps for today will allow us to disassemble and replace the timing belt of the Fiat Bravo 1.9 MultiJet. First, let's raise the vehicle and …

Other guides you may be interested in

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos