Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TCM Module on Ford Vehicles?

Model: Ford Ford Various
Part: Control unit

Video tutorial

To reset the TCM module that controls the automatic gearbox on Ford vehicles, insert the ignition key into the ignition switch and turn it to switch on the instrument panel: you will need to start the engine and let it idle for about five minutes. Next, press the brake pedal and move the gear selector through all the positions indicated next to the lever; once this operation is complete, you can drive the car normally, ensuring that the gearbox is fully restored.


Updated on 30 October 2026 by ScegliAuto


Related tutorials

How do you reset the automatic transmission of Ford cars?
Ford Ford Various In order to reset the automatic transmission of Ford vehicles, you need to open the hood to locate the components inside. Here you will find the batt…
How to Reset the Transmission on Ford Vehicles
How to Reset the Transmission on Ford Vehicles
Ford Ford Various To reset the transmission on Ford vehicles, first turn on the instrument cluster and put the gearbox in neutral. Then, switch off the car after about…
How to reset the battery management system on Ford vehicles
How to reset the battery management system on Ford vehicles
Ford Ford Various In this video, see how to reset the Battery Management System (BMS) on a Ford C-Max, but the system is applicable to all Ford vehicles. Each time you…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos