Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the turbocharger of the Ford Focus 1.8 TDCi

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Turbocharger

Today's main steps will show us how to disassemble and replace the turbocharger of the Ford Focus 1.8 TDCi. First of all, we open the hood of the car and start disassembling and removing the air filter box and the intake hose, unscrewing all the fixing screws; we disconnect the electric connector of the turbo pressure, as shown in the video. Now we unscrew the screws of the manifold connected to the turbocharger, lifting the car to access it; we remove the turbine and replace it with a new one if damaged, following the video tutorial until the end!

Posted on 20 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the turbine of the Ford Focus 1.8 TDCI
Disassembly of the turbine of the Ford Focus 1.8 TDCI
Ford Focus (1998-2004 / MK 1) In today's video tutorial we will see how to remove and replace the turbine of the Ford Focus 1.8 TDCI engine of both the first and second series; in…
How to replace the turbine on Ford Focus 1.6 TDCI
How to replace the turbine on Ford Focus 1.6 TDCI
Ford Focus (2011-2018 / MK 3) We see below the main instructions that will allow us to disassemble and replace the turbine of the Ford Focus 1.6 TDCI. First we open the bonnet of …
Replacement of the diesel filter of the Ford Focus 1.6 TDCi
Replacement of the diesel filter of the Ford Focus 1.6 TDCi
Ford Focus (2004-2011 / MK 2, Focus 2) The following steps will show us how to disassemble and replace the diesel filter of the Ford Focus 1.6 TDCi. First, we open the hood of the car and …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos