Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Turbocharger from the Ford Focus 1.8 TDCI

Model: Ford Focus MK 1 - Years 1998-2004
Part: Turbocharger

In today's tutorial video, you will learn how to remove and replace the turbocharger of the Ford Focus 1.8 TDCI, applicable to both the first and second series; in this case, the operation is performed with the engine removed. First, disconnect the exhaust manifold from the turbocharger; then, undo the fixing bolts of the turbo using a socket spanner, and disconnect the air hose. At this point, disconnect the sensor cable to completely remove the turbocharger; for reassembly, simply follow the reverse procedure!

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Turbocharger on a Ford Focus 1.6 TDCI
How to Replace the Turbocharger on a Ford Focus 1.6 TDCI
Ford Focus (2011-2018 / MK 3) Below are the main instructions for removing and replacing the turbocharger on a Ford Focus 1.6 TDCI. First, open the bonnet of your car and start by…
Removing the Starter Motor on a Ford Focus 1.6 TDCi MK2
Removing the Starter Motor on a Ford Focus 1.6 TDCi MK2
Ford Focus (2004-2011 / MK 2, Focus 2) Let's see how to remove the starter motor on a Ford Focus 1.6 TDCi second generation, following the instructions below. First, open the bonnet of you…
How to replace the turbocharger of the Ford Focus 1.8 TDCi
How to replace the turbocharger of the Ford Focus 1.8 TDCi
Ford Focus (2004-2011 / MK 2, Focus 2) Today's main steps will show us how to disassemble and replace the turbocharger of the Ford Focus 1.8 TDCi. First of all, we open the hood of the car…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos