Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the airbag of the Ford C Max

Model: Ford C Max MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Airbag

See other generations:
Video tutorial

Removing the steering wheel airbag on a Ford C Max model 1 car is a simple and quick operation to perform independently. Before proceeding with the removal, make sure to turn off the vehicle, remove the key, and disconnect the battery.

To remove the airbag, we must first insert a flat tip screwdriver along the side line of the steering wheel to remove the cover. Insert the screwdriver into the hole on the back to unlock the airbag lever and remove the central body.

Disconnect the electrical connector of the airbag and remove the central body. After completing these steps, we can proceed with the removal of the steering wheel if necessary.


Posted on 25 February 2025 by ScegliAuto


Related tutorials

Removing the Airbag on a Ford C Max
Removing the Airbag on a Ford C Max
Ford C Max (2003-2010 / MK 1) Learn how to remove the steering wheel airbag on a Ford C Max. Disconnect the battery terminals located in the engine bay. Remove the plastic cover a…
How to Disable the Passenger Airbag on a Ford C-Max
Ford C Max (2010-2019 / MK 2) In this video, learn how to disable the passenger airbag on a Ford C-Max. This is useful when transporting a child in a front-facing seat, as an acti…
How to Remove the Radio from a Ford C Max
How to Remove the Radio from a Ford C Max
Ford C Max (2003-2010 / MK 1) Removing the radio from a Ford C Max to install a new one? This is not too complicated; here's how to do it. Insert the keys into the slots at the co…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos