Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to replace the engine air filter on Ford Focus Sw

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Air filter
Operation: How to replace the engine air filter on Ford Focus Sw

How to replace the engine air filter on Ford Focus Sw? Let's see in this video how to proceed: open the car door, pull up the engine compartment opening lever located at the bottom left of the dashboard and lift up the front hood, secure the same with the rod. With a screwdriver we unscrew the air box (where the air filter is present). We extract the worn air filter and insert a new one making it adhere well around the walls of the box. Finally, we put back the cap of the air box and tighten the pins. We close the front hood at the end of the maintenance.


Posted on 23 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Focus 2011-2018 - Where is the Ford Focus III engine air filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos