Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the maintenance light on the 2019 Ford Explorer

Model: Ford Explorer MK 5, U502 - Years 2011-2019
Part: Service warning light

If you want to carry out the manual reset procedure of the maintenance light on the instrument panel of your 2019 Ford Explorer, you must follow the steps described in the following guide addressed to you. First, you must enter the car and turn on the instrument panel if you have not already done so. Immediately press the menu button located on the left side of the steering wheel and then select the "Settings" option. Once you have entered the settings screen, click on "Vehicle" and then select "Oil life reset". Finally, hold down the "OK" button until the reset is complete.

Posted on 11 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Maintenance Light on a Ford Explorer
How to Reset the Maintenance Light on a Ford Explorer
Ford Explorer (2011-2019 / MK 5, U502) In this brief guide, we will see how to reset the maintenance light, which indicates the remaining oil life, on a fifth-generation Ford Explorer, pro…
How to Reset the Oil Service Light on the Ford Explorer?
How to Reset the Oil Service Light on the Ford Explorer?
Ford Explorer (2011-2019 / MK 5, U502) In this tutorial, you can see how to reset the oil service light on the Ford Explorer, a very simple and quick operation to be performed only after c…
Reset the Service Light on a Ford Explorer
Reset the Service Light on a Ford Explorer
Ford Explorer (2011-2019 / MK 5, U502) In this very short tutorial, the procedure to reset the service light on a fifth-generation Ford Explorer, produced from 2011 to 2019, is shown. Star…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos