Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Ford Ka?

Model: Ford Ka MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Service warning light

See other generations:
Video tutorial

It will be possible to reset the Service light that is shown on the instrument panel of the Ford Ka by turning the key to turn on the instrument panel and then holding down the accelerator and brake pedals at the same time. You will need to keep both pedals pressed for about 15 seconds, until the Service light starts flashing.

Once it stops flashing, you can release the pedals and turn off the instrument panel. Leave it off for about 2 minutes, so that the reset operation is completed correctly.


Posted on 7 May 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Ford Ka?
Ford Ka (2016-2019 / MK 3) To reset the Service light on the Ford Ka, press and hold the button located on the right side of the instrument cluster. While holding it, insert th…
How to Reset the Service Light on the Ford Ka?
How to Reset the Service Light on the Ford Ka?
Ford Ka (2008-2016 / MK 2) To reset the Service light on the Ford Ka, turn the key to switch on the instrument panel and then press and hold the accelerator and brake pedals si…
How do you reset the Service light on the Ford Ka?
How do you reset the Service light on the Ford Ka?
Ford Ka (2016-2019 / MK 3) On the instrument panel of the Ford Ka, the Service light that appears can be reset by holding down the button located on the right side of the instr…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos