Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light in Ford vehicles?

Model: Ford F-150 MK 14 - Years 2021-2026
Part:

In reference to the question at hand, let's take the Ford F150 as an example, of which we can see in the video the step-by-step procedure of our interest being carried out. When the warning light comes on, probably one or more tires are deflated or punctured, unless the electronic pressure detection sensor is broken. The exact deflated tire is displayed on the onboard computer, so we proceed to inflate it and then go inside the cabin, doing the following: turn on the instrument panel, access the Menu, select Vehicle Settings, Tire Monitoring, and finally, when asked if you want to reset, hold down Ok.

Posted on 17 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Tire Pressure Sensor on a Ford F-150
How to Replace the Tire Pressure Sensor on a Ford F-150
Ford F-150 (2015-2020 / MK 13) Below are the instructions to remove and replace the tire pressure sensor, allowing you to reset the TPMS light on your Ford F-150. First, lift the v…
How to Reset the Tire Pressure Light on Ford 150
How to Reset the Tire Pressure Light on Ford 150
Ford F-150 (2015-2020 / MK 13) In this video tutorial, you can see how to reset the tire pressure light on a Ford 150 by following a few simple steps that will guide you step by st…
How to Reset the TPMS Light on a Ford F-150
How to Reset the TPMS Light on a Ford F-150
Ford F-150 (2015-2020 / MK 13) If the TPMS sensor on your new Ford F-150 shows errors related to tire pressure, don't worry; you just need to perform a simple reset to resolve the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos