Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse box and fuse positioning of the Ford Transit Connect.

Model: Ford Connect MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Fuse box

See other generations:
Video tutorial

Today we will see the instructions that will allow us to access the fuse boxes, going to find the diagram and the diagram, of the Ford Transit Connect. First, we open the front door on the driver's side and start removing the plastic cover found at the bottom left, accessing the internal fuses; we open the hood and remove the plastic cover located at the top right (behind the battery), accessing the external fuses, as shown in the video.

At this point we find the fuse diagram inside the covers, also available in the vehicle manual.


Posted on 5 October 2025 by ScegliAuto


Related tutorials

How to replace the timing belt on the Ford Transit Connect 1.5 TDCi.
How to replace the timing belt on the Ford Transit Connect 1.5 TDCi.
Ford Connect (2013-2023 / MK 2) In this guide, we will go through the main steps on how to disassemble and replace the timing belt of the Ford Transit Connect 1.5 TDCi. First, let's…
How to remove the rear seats of the Ford Transit Connect
How to remove the rear seats of the Ford Transit Connect
Ford Connect (2013-2023 / MK 2) In this guide, we will see the instructions that will allow us to disassemble and remove the rear seats of the Ford Transit Connect. First, open the …
Replacing the Fuel Filter on a Ford Transit
Replacing the Fuel Filter on a Ford Transit
Ford Connect (2002-2013 / MK 1) Replacing the fuel filter on a Ford Transit? Let's look at the disassembly. Lift the bonnet and secure it. Once you locate the fuel filter, disconnec…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos