Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the timing belt on the Ford Transit Connect 1.5 TDCi.

Model: Ford Connect MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Timing belt

See other generations:
Video tutorial

In this guide, we will go through the main steps on how to disassemble and replace the timing belt of the Ford Transit Connect 1.5 TDCi. First, let's open the vehicle's hood and begin removing the timing cover by detaching the various hoses. Next, we will lift the vehicle and remove the front right wheel and the wheel arch liner, then proceed to remove the crankshaft pulley and the serpentine belt, as shown in the video.

At this point, we will take the necessary references for replacing the timing belt, replacing it with a new original one; subsequently, the water pump will also be replaced.


Posted on 17 December 2025 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery in a Ford Transit Connect
How to Replace the Key Fob Battery in a Ford Transit Connect
Ford Connect (2002-2013 / MK 1) The procedure to replace the battery in a Ford Transit Connect key fob is quite simple. Before you start, ensure you have the necessary materials: a …
How to replace the cabin fan of the Ford Transit Connect
How to replace the cabin fan of the Ford Transit Connect
Ford Connect (2013-2023 / MK 2) In this guide, we will see the main instructions useful for disassembling and replacing the cabin fan of the Ford Transit Connect. First, let's open …
How to replace the front headlight bulb of the Ford Transit Connect
How to replace the front headlight bulb of the Ford Transit Connect
Ford Connect (2013-2023 / MK 2) Today's instructions will allow us to disassemble and replace the headlight bulb of the Ford Transit Connect. First, we open the hood of the vehicle …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos