Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to turn off the service light on a Ford Ka.

Model: Ford Ka MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Service warning light

See other generations:
Video tutorial

The procedure described in the video only resets the mileage counter that reminds you of the service; the warning light will turn back on after the number of kilometers preset by the manufacturer, so it does not clear any fault codes in the control unit.

Let's turn on the instrument panel and navigate through the menu using the button located on the turn signal lever.

Press this button repeatedly to scroll through the various options that appear on the display until the indication of the kilometers traveled since the last service appears. When we see this information, press and hold this same button for a few seconds.

A message saying "reset in progress" will appear on the screen; keep holding it until we see the count reset to "0." Once completed, turn off the ignition. The procedure is finished.


Posted on 12 December 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Ford Ka
How to Reset the Service Light on a Ford Ka
Ford Ka (2008-2016 / MK 2) How to reset the service light on a Ford Ka. This is a very simple operation; enter the vehicle, turn on the ignition, and check the illuminated ligh…
How to Reset the Tyre Pressure Light on a Ford Ka
How to Reset the Tyre Pressure Light on a Ford Ka
Ford Ka (2016-2019 / MK 3) This video tutorial shows the steps to reset the tyre pressure light on a third-generation Ford Ka, produced from 2016 to 2019. First, turn on the ve…
How to Reset the Maintenance Light on a Ford Ka
How to Reset the Maintenance Light on a Ford Ka
Ford Ka (2016-2019 / MK 3) In this article, with the help of the video at the bottom, you will see how to reset the maintenance light on a Ford Ka. It is recommended to perform…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos