Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Ford Ka

Model: Ford Ka MK 3 - Years 2016-2019
Part:

This video tutorial shows the steps to reset the tyre pressure light on a third-generation Ford Ka, produced from 2016 to 2019. First, turn on the vehicle's instrument cluster without starting the engine, then press the menu button on the central console to open the menu on the display. Now select "vehicle settings" using the arrows, followed by "tyre pressure monitoring." Once done, press and hold the "OK" button to initiate the reset of the light and set the new tyre parameters.

Updated on 6 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure sensor on a Ford Ka?
How to reset the tire pressure sensor on a Ford Ka?
Ford Ka (2016-2019 / MK 3) To reset the tire pressure warning light on a Ford Ka, start by turning on the instrument panel without starting the engine. Use the buttons on the d…
Reset Tyre Pressure Warning Light on Ford Ka 2
Reset Tyre Pressure Warning Light on Ford Ka 2
Ford Ka (2008-2016 / MK 2) In this short video tutorial, you will learn how to reset the tyre pressure warning light on a Ford Ka second series. Before performing the operation…
How to Reset the Tyre Warning Light on the Ford Ka 2016
How to Reset the Tyre Warning Light on the Ford Ka 2016
Ford Ka (2008-2016 / MK 2) If the orange tyre warning light illuminates on the dashboard of your Ford Ka second series (2016) despite no punctures or pressure loss, simply rese…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos