Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the brake and rear light bulbs on the Ford C-Max.

Model: Ford C Max MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light

See other generations:
Video tutorial

This is an operation that may require some patience because the attachments can be stubborn. Let's open the trunk and remove the carpet panel from the side of the headlight we want to replace.

Behind the panel, we will find plastic butterfly screws that need to be unscrewed, which will allow us to remove the entire headlight assembly, although it may be stuck due to the seals; we will therefore need to pull it out from the outside with some determination.

Disconnect the electrical connector; on the back of the headlight, we will find pressure plastic clips so that the outer lens can be detached.

Locate the dual-filament brake/position bulb, which needs to be turned 1/4 turn counterclockwise. Insert the new bulb without touching it with bare hands and turn it clockwise.

Reattach the outer lens, press so that all the clips snap back into place, reconnect the electrical connector, push the headlight assembly back into its housing, screw in the two butterfly screws, and replace the cover panel.


Posted on 14 January 2026 by ScegliAuto


Related tutorials

Ford C Max (2010-2019 / MK 2) In this video we see how to change all the front lights bulbs of a Ford C-Max II, so position lights, high beams, low beams and turn signals. The fle…
Ford C Max (2010-2019 / MK 2) .. damaged? Here’s how to remove them on a Ford C-Max. Open the front bonnet by pulling the lever located at the bottom right of the dashboard, and secure i.. …
Ford C Max (2010-2019 / MK 2) .. and replace the rear light bulbs on a Ford C-Max. First, open the rear hatch of the boot and start removing the plastic cover of the inner panel to.. …

Other guides you may be interested in

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos