Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light from a Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Tail light

Independently removing the rear light from a Ford Kuga produced from 2012 to 2019 or a Ford Escape is a simple and quick operation. Start the removal process by opening the boot of the vehicle and using a flat-blade screwdriver to remove the plastics along the side of the boot's body. Remove the nuts located on the body and disengage the light. Disconnect the light connector before removing it from its housing. Follow the same steps for removing the left rear light. To replace the bulbs, simply open the light unit and insert the new bulbs. The reassembly of the light follows the reverse procedure.

Posted on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light on a Ford Kuga
How to Remove the Rear Light on a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) How to remove the rear light on a Ford Kuga? This is a very simple operation; see in this video how to proceed. Lift the boot lid; unscrew the nuts t…
Removing the Rear Headlamp Bulb on a Ford Kuga
Removing the Rear Headlamp Bulb on a Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) In this video tutorial, you will learn how to remove the rear headlamp bulb from a Ford Kuga in simple steps without any tools. First, open the boot …
How to Replace the Rear Light Bulb on a Ford Kuga?
How to Replace the Rear Light Bulb on a Ford Kuga?
Ford Kuga (2012-2019 / C520, MK 2) To replace the rear light bulb on a Ford Kuga, open the tailgate to access the screws that secure the corresponding light on its side. Once these bol…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos