Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on the Ford KA?

Model: Ford Ka MK 3 - Years 2016-2019
Part:

In this tutorial, we will see how to reset the tyre warning light on the Ford KA, an extremely simple and quick operation, to be carried out only after restoring the correct pressure of each tyre following the instructions in the manual. First, enter the cabin, then insert the key and turn on the instrument panel. Next, scroll through the various display information using the "TRIP" button located at the end of the left lever, reach the "Tyre monitor" option and perform the reset by holding down the same button. To complete the procedure, simply restart the vehicle.

Posted on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure sensor on the 2017 Ford Ka
How to reset the tire pressure sensor on the 2017 Ford Ka
Ford Ka (2016-2019 / MK 3) If you do not know the steps to follow to complete the manual reset procedure of the tire pressure warning light of your third series Ford Ka (2017),…
How do I reset the Ford Ka Service light?
Ford Ka (2016-2019 / MK 3) In order to reset the Ford Ka's Service light, you need to press and hold the button located on the right side of the instrument panel. While holding…
How to reset the tire pressure sensor on a Ford Ka?
How to reset the tire pressure sensor on a Ford Ka?
Ford Ka (2016-2019 / MK 3) To reset the tire pressure warning light on a Ford Ka, start by turning on the instrument panel without starting the engine. Use the buttons on the d…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos