Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : How to remove the side window of a Ford Fiesta

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK VI, Fiesta 6, MK 6 - Years 2008-2017
Part: Side window
Operation: How to remove the side window of a Ford Fiesta

Let's see how to remove the side window of a Ford Fiesta. Disconnect the battery terminals in the engine compartment, unscrew the screws located in the space of the upper lever of the door opening with a screwdriver and the screws in the handle (after removing the plastic screw covers). We remove the plastic covering above the handle, unscrew the screws left on the door panel and remove the clips that tighten it. Remove the panel with your hands and unhook it from the door (disconnect the power cables and the opening cable). We remove the adhesive coating (if any) and unscrew the glass fixed to the lifting rail. Let's extract the side glass from the car door and replace it.


Posted on 19 November 2023 by ScegliAuto



How to remove the door panel on the Ford Fiesta MK6
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) In today's video tutorial we will see how to remove the front passenger door panel and how to replace the broken window on the sixth series Ford Fies
How to replace the window lifter mechanism of the Ford Fiesta.
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Let's see below the step-by-step instructions for disassembling and replacing the window lifter mechanism of the Ford Fiesta, following these simple
How to replace the window lifter button on a Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Before we can start, we will have to go and open the door of our Ford Fiesta, thus obtaining the necessary space to carry out this procedure. Using a

Other guides that may interest you

    Frequently Asked Questions

    • Fiesta 2017-2023 - What to do if the Ford Fiesta window is blocked? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos