|
Do it yourself
| |||
| ||||
Ford Focus: Where to Find the Fuses and Relay Boxes
Model: Ford Focus
MK 4
- Years 2018-2025
On the Ford Focus, fuses are not located in just one place: there are usually at least two boxes, one in the cabin and one in the engine bay. On some versions (especially station wagons), there may also be an additional box in the boot. To find the cabin fuse box, first check the driver's and passenger's side areas. Depending on the model, you may find it behind a small side cover on the dashboard (by opening the door and removing the panel), or under the glove compartment/footwell area of the passenger side, behind a plastic cover. Once you open the flap, you will usually see the row of fuses and often a fuse puller. The fuse box in the engine bay is almost always near the battery or close to the wheel arch, with a snap-on lid. Open the bonnet, locate the rectangular plastic box, and unclip the lid tabs: inside you will find the main fuses and often some relays. If you need to work on a fuse, do so with the ignition off and replace it only with one of the same amperage (same colour/number). If a fuse blows again immediately, there is usually a downstream problem (short circuit or faulty component) and it is advisable to diagnose before continuing to replace it.
Posted on 11 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Ford Focus
(2011-2018 /
MK 3)
Today, I will explain where the fuse boxes are located on the 2013 Ford Focus mk3 model. The Ford Focus has two fuse boxes. The first box is located …
Ford Focus
(2004-2011 /
MK 2, Focus 2)
Let’s see where the fuses and relays are located on the Ford Focus MK2; the first box is next to the battery, in the bonnet, located just above this …
Ford Focus
(2011-2018 /
MK 3)
In today's video, you will see the location of the horn relay and instructions for its replacement on the Ford Focus third generation, following thes…
Other guides you may be interested in
|
How to Bleed the Clutch on a Renault Clio?
To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.273
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |