Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to top up the coolant in a Ford Mondeo

Model: Ford Mondeo / Fusion MK 4 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Checks and maintenance

See other generations:
Video tutorial

Let's see how to top up the coolant in the reservoir of a Ford Mondeo yourself. First: pull the plastic lever located at the bottom left of the dashboard, lift the front bonnet and secure it with the metal prop.

Next, locate the coolant reservoir cap (unscrew it). Using a funnel, top up with coolant and close the reservoir cap. Close the bonnet after maintenance. Test the correct operation of the maintenance performed by starting the engine.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

Disassembly and Replacement of the Cooling Radiator for the Ford Mondeo 2.0 TDCi
Disassembly and Replacement of the Cooling Radiator for the Ford Mondeo 2.0 TDCi
Ford Mondeo / Fusion (2007-2014 / MK 3) In this guide, we will see the main instructions on how to disassemble and replace the engine cooling radiator of the Ford Mondeo 2.0 TDCi. First, op…
Where is the Temperature Sensor on the Ford Mondeo and How to Replace It?
Where is the Temperature Sensor on the Ford Mondeo and How to Replace It?
Ford Mondeo / Fusion (2014-2021 / MK 4) The coolant temperature sensor on the Ford Mondeo is located under the bonnet, specifically between the radiator and the water reservoir. If it malfu…
How to replace the coolant in the Ford Mondeo.
How to replace the coolant in the Ford Mondeo.
Ford Mondeo / Fusion (2007-2014 / MK 3) Let's see how to replace the coolant in the Duratec 1.8 engine of a Ford Mondeo. Safely lift the car and remove the lower cover to access the radiato…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos