Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the EGR Valve on a Ford Ranger 3.2

Model: Ford Ranger T6, P375, PX - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: EGR valve

See other generations:
Video tutorial

In this video, you will see the main steps to dismantle and replace the EGR valve on a Ford Ranger 3.2. First, open the bonnet of the vehicle and locate the EGR valve, which is situated at the rear of the engine block. To remove the EGR valve, disconnect the exhaust gas recirculation pipe and unplug the electrical connector from the sensor.

Once the EGR valve is removed, clean or replace it with the original part; correctly reassemble all components, following the video tutorial to the end!


Posted on 16 August 2026 by ScegliAuto


Related tutorials

How to Remove the EGR Valve on Ford Ranger Pickup?
How to Remove the EGR Valve on Ford Ranger Pickup?
Ford Ranger (1998-2011 / MK 3) As seen in this tutorial, removing the EGR valve on the Ford Ranger pickup is a very simple and quick operation. First, to work safely, ensure the en…
How to Replace the Gear Knob on the Ford Ranger
How to Replace the Gear Knob on the Ford Ranger
Ford Ranger (1998-2011 / MK 3) If the gear knob in your Ford Ranger (1998-2011) is worn out and you want to know the steps to replace it yourself, read this guide and follow the pr…
Where Are the Fuses on a Ford Ranger?
Ford Ranger (1983-1992 / MK 1) The exact location of the fuses on a Ford Ranger is shown in the vehicle's owner's manual. However, since this model is quite old, it is likely that …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos