Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on a Ford Kuga

Model: Ford Kuga C394, MK 1 - Years 2008-2012
Part: Service warning light

In this brief video today, we will go through the steps to reset the oil change light on a Ford Kuga, first generation model produced from 2008 to 2012. Start the procedure by pressing and holding both the brake and accelerator pedals down, then turn the ignition to the first position without starting the engine. After doing this, you will see a notification on the screen indicating that the reset is in progress, so continue to hold both pedals for about 15 to 20 seconds until the reset completed notification appears.

Posted on 11 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light (Engine Oil) on the Ford Kuga MK1
How to Reset the Service Light (Engine Oil) on the Ford Kuga MK1
Ford Kuga (2008-2012 / C394, MK 1) Discover the instructions on how to reset the service light for the regular maintenance oil change on the first generation Ford Kuga, in simple and q…
How to Reset the Oil Light on a 2021 Ford Kuga
How to Reset the Oil Light on a 2021 Ford Kuga
Ford Kuga (2020-2026 / MK 3) In this mini guide for your 2021 Ford Kuga, discover how to manually reset the oil light on the dashboard. First, enter your car and turn on the igni…
How to Reset the Oil Change Light in the Ford Kuga?
How to Reset the Oil Change Light in the Ford Kuga?
Ford Kuga (2008-2012 / C394, MK 1) In this tutorial, you will see how to remove the oil change light in the Ford Kuga. This simple and quick operation should only be performed after ch…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos