Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light (Engine Oil) on the Ford Kuga MK1

Model: Ford Kuga C394, MK 1 - Years 2008-2012
Part: Service warning light

Discover the instructions on how to reset the service light for the regular maintenance oil change on the first generation Ford Kuga, in simple and quick steps. First, get inside the vehicle and turn on the ignition; then press and hold the brake pedal and the accelerator pedal simultaneously: now turn on the ignition and wait for about fifteen seconds, as shown in the video. At this point, you will see a message indicating that the service light has been reset; you can then turn off and start the engine!

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Ford Kuga
How to Reset the Service Light on a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) When your Ford Kuga indicates, with the activation of the specific light, that it is time for an oil and filter change, it alerts you to perform the …
Resetting the Maintenance Light on Ford Kuga
Resetting the Maintenance Light on Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) Have you changed the engine oil on your first generation Ford Kuga (2008-2012) but the maintenance light remains on? Don't worry, this brief tutorial…
How to reset the service light on a Ford Kuga
How to reset the service light on a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) The selected tutorial allows you to observe the steps to perform the service light reset procedure on a Ford Kuga vehicle. Get into the car, turn on …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos