Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter on a Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Diesel fuel filter

See other generations:
Video tutorial

How to replace the diesel filter on a Ford Focus? In this video, see the replacement process. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, lift the front bonnet and secure it. Remove the soundproofing panel of the engine (if necessary), then, using a socket wrench, unscrew the securing bolts located above the filter container (disconnect the wires and various hoses from the filter) where the filter is located.

Extract the diesel filter and replace it with a new one. Finally, reassemble the diesel filter container (connect the hoses and wires) and tighten the screws.


Updated on 14 March 2026 by ScegliAuto


Related tutorials

Replacing the Diesel Filter on a Ford Focus
Replacing the Diesel Filter on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Do you want to replace the diesel filter on your Ford Focus? Let’s look at removing the filter. Locate the diesel filter as shown in the video. Disco…
How to Remove the Diesel Filter from a Ford Focus
How to Remove the Diesel Filter from a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Before you can start, open the bonnet of your Ford Focus. Begin by unclipping and removing the upper engine cover. Next, unscrew and remove the bolts…
Replacing the Diesel Filter of the Ford Focus 1.6 TDCi
Replacing the Diesel Filter of the Ford Focus 1.6 TDCi
Ford Focus (2004-2011 / MK 2, Focus 2) The following steps will show you how to remove and replace the diesel filter of the Ford Focus 1.6 TDCi. First, open the bonnet of the vehicle and b…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos