Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Ranger
  6. : Replacement of the electric fuel pump

Ford Ranger - Video tutorial

Model: Ford Ranger - Years 1993-1997
Part: Fuel pump
Operation: Replacement of the electric fuel pump

Empty the fuel tank. Raise the car onto the deck and begin to disconnect the various fuel hoses and electrical cables from the tank positioned under a pan to collect the fuel that flows out. Using a ratchet wrench provided with an extension, remove the two bolts of the metal band that supports the tank. Once the tank has been freed from its stops, remove it and place it on a work surface. Before removing the pump, carefully clean the surrounding surface. Turn the ring nut on the head of the pump by ¼ of a turn and now it is possible to extract the pump from the tank, allowing the fuel to flow into the contents. Replace the pump with a new one following the assembly instructions contained in the package. Before reassembling the pump, carefully clean the tank inlet. Refit the tank, reconnect the hoses and the pump connector.


Posted on 4 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Ranger 1998-2011 - How much does it cost to replace the Ford Ranger diesel pump? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos