Do it yourself
Frequently asked questions about cars and motorcycles

Reset Light on Ford Transit

Model: Ford Transit MK 7 - Years 2006-2014
Part: Warning light – error code

Reset the maintenance light on a Ford Transit if it appears. This operation is very simple. Enter the vehicle and turn on the ignition with the key, then check the light. Turn off the ignition. Press the brake pedal and accelerator pedal firmly. Turn the ignition back on. When you turn the ignition back on, the maintenance will be reset. Finally, check the changes made to the vehicle and always remember to make adjustments to the onboard computer while the vehicle is stationary and turned off. Verify if the maintenance reset on the Transit was successful.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Transit (2006-2014 / MK 7) Let’s see how to reset the service light on a Ford Transit without a display menu. This is the classic Ford system using the pedal combination; press…
Ford Transit (2014-2024 / MK 8) To complete the procedure that allows you to manually reset the oil light on your Ford Transit (year 2018) takes less than a minute. First, reach the…
Ford Transit (1994-2000 / MK 5) The selected video shows how to reset the maintenance light on a Ford Transit vehicle. Get in the vehicle, sit in the driver's seat, insert the key i…

Other guides you may be interested in

    Frequently Asked Questions

    • Transit 2000-2006 - Where is the radio code located for the Ford Transit 6000 CD? Read answer
    • Transit 2014-2024 - Why does the brake light stay on after a pad change in a Ford Transit? Read answer
    • Transit 2006-2014 - Why is the glow plug light flashing on my Ford Transit? Read answer
    • Transit 2006-2014 - How do you reset the brake pad warning light on Ford Transit Custom? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos