Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Mondeo / Fusion
    4. : Replacing the evaporator core

Ford Mondeo / Fusion - Video tutorial

Model: Ford Mondeo / Fusion MK 1 - Years 1993-2000
Part: Air conditioning
Operation: Replacing the evaporator core

This video shows some pictures related to the process of replacing the evaporator core of a Ford Mondeo. First you need to remove the radio block, the dashboard, the entire dashboard, the glovebox and the steering wheel. It is then necessary to disconnect all the electrical connections. Remove the evaporator from its housing by disconnecting the upstream pipes. After extraction, the grille located near the windscreen must be removed. It is therefore necessary to take a new evaporator and insert it into its housing and connect the two pipes, using pliers, as shown in the images.


Posted on 5 July 2023 by ScegliAuto



Replacing the evaporator temperature sensor
Ford Mondeo / Fusion (2000-2007 / MK 2) This video shows the complicated process of replacing the evaporator temperature sensor on a Ford Mondeo. The replacement of the single piece itself
Guide to replacing the timing belt of the Ford Mondeo 2.0 TDCI.
Ford Mondeo / Fusion (2007-2014 / MK 3) Today's steps will show us the procedure for disassembling and replacing the timing belt of the Ford Mondeo. First, we lift the vehicle and begin by
Replacing the instrument cluster lights on Ford Mondeo (2000-2007)
Ford Mondeo / Fusion (2000-2007 / MK 2) In this video we will see how to remove and replace the instrument cluster lights on a Ford Mondeo from 2000 to 2007, following these simple steps. F

Other guides that may interest you

How to reset the oil change light on Kymco Agility 125

If we have done the oil change on this type of scooter in do-it-yourself mode, we need to complete the job by resetting the oil change light that came on in the instrument panel display. In the description below we can find the necessary steps to do this. First you need to insert the key on the ignition switch and turn on the ignition. Then show the total mileage on the display and then press the two buttons at the bottom of the panel at the same time until the oil change light goes off.

Watch the video!


by ScegliAuto

More videos