Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Bulb

Model: Ford Mondeo / Fusion MK 2 - Years 2000-2007
Part: Headlight bulb

To replace the front headlight bulb, you first need to remove the front grille, then pull out the retaining tabs of the headlight and remove it from its housing by disconnecting the connector attached to it. At this point, unscrew the screws securing the plastic cover behind the headlight, which will come off along with the ignition unit, disconnect the connector attached to the bulb, unclip the retaining ring, and extract the bulb from its housing; then fit the new bulb (avoid touching the glass with your hands), secure it by reapplying the retaining ring, connect the power connector, and reposition the cover. Also replace the side indicator bulb (T5 fitting). Then reassemble the headlight in its housing.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Ford Mondeo 5
How to replace the front headlight bulb of the Ford Mondeo 5
Ford Mondeo / Fusion (2022-2026 / MK 5) In the following guide, we will explain step by step how to correctly replace the headlight bulb of your Ford Mondeo Mk5. First, make sure you have p…
Replacing the Front Headlight Bulb
Replacing the Front Headlight Bulb
Ford Mondeo / Fusion (2000-2007 / MK 2) Open the front bonnet and ensure it is securely supported. Remove the front grille (or mask) and take out the headlight retaining clips: these are tw…
How to Replace the Indicator Bulb on Ford Mondeo
How to Replace the Indicator Bulb on Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Replacing the front headlight and indicator bulb is a simple and quick task that can be done independently on a Ford Mondeo. To replace it, open the …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos