Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Timing Belt Replacement for Ford Ka, Fiat Punto 1.2 - 1.4 Petrol

Model: Ford Ka MK 2 - Years 2008-2016
Part: Timing belt

In this video, you will learn how to replace the timing belt on vehicles with 1.2 and 1.4 MultiAir engines, specifically a Ford Ka but also applicable to various Fiat models (they use the same engine). First, open and lift the bonnet of the car. Lift the vehicle and disconnect the electrical connector from the starter motor, then remove the front wheels. Next, remove the screws from the wheel arch liner and the screws from the plastic cover protecting the pulley and belt. Using a 13 mm spanner, remove the auxiliary belt, and with a 10 mm spanner, unscrew the bolt to remove and replace the timing belt!

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How and When to Replace the Timing Belt on a Ford Ka 1.2
How and When to Replace the Timing Belt on a Ford Ka 1.2
Ford Ka (2008-2016 / MK 2) In today's tutorial video, you will see the main instructions on how to remove the timing belt on the second series Ford Ka with a 1.2 engine, as wel…
When Should You Replace the Timing Belt on a Ford Ka?
When Should You Replace the Timing Belt on a Ford Ka?
Ford Ka (1996-2008 / MK 1) It is essential to replace the timing belt on the Ford Ka to avoid serious damage to the engine, particularly to the pistons, valves, camshaft, and s…
Replacing the Timing Belt and Water Pump on a Ford Ka 1.2
Replacing the Timing Belt and Water Pump on a Ford Ka 1.2
Ford Ka (2008-2016 / MK 2) In this video tutorial, you will learn how to replace the timing belt and water pump on a Ford Ka with a 1.2 engine. First, open the bonnet and start…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos