Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Belt and Water Pump on a Ford Ka 1.2

Model: Ford Ka MK 2 - Years 2008-2016
Part: Timing belt

In this video tutorial, you will learn how to replace the timing belt and water pump on a Ford Ka with a 1.2 engine. First, open the bonnet and start by removing the intake hose and air filter box, disconnecting the various pipes and the electrical connector; then unscrew the screws from the timing cover and also remove the cylinder head cover (using a 10 mm socket). At this point, take the necessary references for replacing the belt with the new one, following the video until the end!

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

When Should You Replace the Timing Belt on a Ford Ka?
When Should You Replace the Timing Belt on a Ford Ka?
Ford Ka (1996-2008 / MK 1) It is essential to replace the timing belt on the Ford Ka to avoid serious damage to the engine, particularly to the pistons, valves, camshaft, and s…
How to Replace the Timing Belt/Chain on a Ford Ka
How to Replace the Timing Belt/Chain on a Ford Ka
Ford Ka (2008-2016 / MK 2) How to replace the timing belt/chain on a Ford Ka: Lift the car on a column lift or jack (if necessary, remove the front wheel using a screwdriver to…
How and When to Replace the Timing Belt on a Ford Ka 1.2
How and When to Replace the Timing Belt on a Ford Ka 1.2
Ford Ka (2008-2016 / MK 2) In today's tutorial video, you will see the main instructions on how to remove the timing belt on the second series Ford Ka with a 1.2 engine, as wel…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos