Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Car Radio

Model: Ford Mondeo / Fusion MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Car stereo

See other generations:
Video tutorial

To remove the car radio, first detach the coverings along the centre tunnel and the sides of the centre console to access the fixing screws of the console support (move the gear lever backwards to facilitate the extraction of the radio). Then remove the two caps at the lower corners of the console to finally insert the four extraction keys into the appropriate slots: insert them fully to release the radio and pull it outwards to detach it from its housing, then disconnect the connectors attached to it.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

How to reset the factory radio on the Ford Mondeo
How to reset the factory radio on the Ford Mondeo
Ford Mondeo / Fusion (2014-2021 / MK 4) In this guide, you will find the instructions to reset the factory radio on the Ford Mondeo. First, get in the car and turn on the ignition; then tur…
Removing the Radio from a Ford Mondeo
Removing the Radio from a Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Removing the head unit from a Ford Mondeo? Here’s how to take it out from the central console. Remove the covering plastics located above the central…
How to Remove the Stereo from the Ford Mondeo Mk3
How to Remove the Stereo from the Ford Mondeo Mk3
Ford Mondeo / Fusion (2007-2014 / MK 3) If you own a Ford Mondeo Mk3 (2007-2014) and are wondering how to safely and correctly remove the factory stereo, follow these steps. First, turn off…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos