Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the water pump on a Ford Fiesta

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023
Part: Pump

Before you start, open the front bonnet of your Ford Fiesta. Begin by unclipping and removing the top engine cover, then remove the timing belt cover as well. Next, loosen the tensioner, and you will have access to the water pump. At this point, unscrew and remove the bolts that secure the water pump to the engine block. Once this step is complete, you can remove the water pump, and you will have finished the disassembly. To install the new pump and close everything up, repeat this procedure in reverse, and the replacement will be complete.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Windscreen Washer Pump on a Ford Fiesta
Replacing the Windscreen Washer Pump on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Before starting any maintenance operation on a vehicle, it is essential to take precautions to ensure the operator's safety by positioning the car on…
How to Remove and Replace the Timing Belt on a Ford Fiesta
How to Remove and Replace the Timing Belt on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How to remove and replace the timing belt on a Ford Fiesta? Lift the car on a column lift (jack), remove the front wheel and the right wheel arch lin…
How to Replace the Auxiliary Belt on a Ford Fiesta 1.2
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Replacing the auxiliary belt on a Ford Fiesta 1.2 is shown in the video at 2:14 (2 hours and 14 minutes). The auxiliary belt is crucial as it enables…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos