Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Access the Fuel Float on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Fuel pump

How to access and remove the fuel pump in the tank of a Ford Fiesta. Lift the car on a column lift and locate the securing screws of the tank. Once the screws are removed, take the tank out from the car's floor. Use a socket to unscrew the securing screws of the cap, remove it from its seat, and unscrew the large plastic securing nut. Finally, disconnect the power connectors and the liquid circulation hoses. Extract the fuel pump float. Install the new fuel pump float and then refit the tank under the car's floor.

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Float on a Ford Fiesta
How to Replace the Fuel Float on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) The procedure to replace the fuel float on a Ford Fiesta is simple, but it is always advisable to consult an expert, as you will be handling a highly…
Guide to disassembling the fuel pump of the Ford Fiesta
Guide to disassembling the fuel pump of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Shortly, we will see the main instructions that will allow us to disassemble and replace the fuel pump or the float of the Ford Fiesta. First of all,…
How to Replace the Fuel Pump on the Ford Fiesta - Ka - Mondeo
How to Replace the Fuel Pump on the Ford Fiesta - Ka - Mondeo
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) In this guide, we will cover the main instructions on how to remove and replace the fuel pump on the Ford Fiesta, as well as the Ka and Mondeo. First…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - Where is the diesel pump located on the Ford Fiesta 1.4 Tdci? Read answer
    • Fiesta 2008-2017 - Where is the Ford Fiesta fuel pump located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos