Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove Cabin Fan on Ford Edge

Model: Ford Edge MK 1, U387 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Blower motor

See other generations:
Video tutorial

On the Ford Edge, the internal cabin fan is located at the lower centre of the dashboard, between the passenger side dashboard and the driver's area. First, disconnect the battery.

To access it, you can only remove the passenger side dashboard area, so take out everything in the glove compartment and remove it. The fan on this car may be a bit difficult to remove due to its particular housing position, but it is secured with standard screws that do not require special tools.

There are three bolts holding the outer housing and three screws securing the cover; finally, disconnect the fan cable with a sharp object.


Updated on 14 April 2026 by ScegliAuto


Related tutorials

Which Fuse is for the Cabin Fan in the Ford Edge?
Which Fuse is for the Cabin Fan in the Ford Edge?
Ford Edge (2006-2014 / MK 1, U387) If the cabin fan in your Ford Edge has suddenly stopped working, the first thing to do is check the status of the relevant fuse, which is indicated i…
How to Replace the Alarm Fuse on the Ford Edge
How to Replace the Alarm Fuse on the Ford Edge
Ford Edge (2006-2014 / MK 1, U387) When the alarm on a 2009 Ford Edge stops working, the cause may be the failure of the corresponding fuse. The fuse for the alarm system is located in…
What is the Fuse Diagram for the Ford Edge?
What is the Fuse Diagram for the Ford Edge?
Ford Edge (2006-2014 / MK 1, U387) In this video, you can see where the fuse boxes of the Ford Edge are located and their respective diagrams, useful if you need to check the fuses of …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos