Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster on a Ford C-Max

Model: Ford C Max MK 2 - Years 2010-2019
Part: Instrument cluster

How do you remove the instrument cluster from your car? Start by disassembling the cluster from above the dashboard. Remove the plastic cover that acts as a trim for the instrument cluster (located beneath the cluster), unscrew the securing screws, and pull the piece until it detaches from inside the dashboard. Disconnect the power connectors for the instrument cluster. After removing the cluster from the dashboard, prepare to install a new piece or reinstall the same one (repair the instrument cluster if necessary). Connect the electrical connector, secure the instrument cluster, and screw in the securing screws.

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Instrument Cluster on a Ford C-Max
How to Remove the Instrument Cluster on a Ford C-Max
Ford C Max (2003-2010 / MK 1) .. How to remove the instrument cluster on a Ford C-Max? Watch this video carefully to see how to proceed.. …
How to Remove the Instrument Cluster from a Ford C Max
How to Remove the Instrument Cluster from a Ford C Max
Ford C Max (2003-2010 / MK 1) How to remove the instrument cluster from a Ford C Max? Learn how to disassemble the parts: lower the steering wheel using the appropriate lever and …
How to Remove the Door Panel on the Ford C-Max?
How to Remove the Door Panel on the Ford C-Max?
Ford C Max (2010-2019 / MK 2) To remove the door panel on the Ford C-Max, first remove the red cap located at the bottom to loosen the screw underneath. Along with this, you will …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos