Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Speedometer on Ford C-Max

Model: Ford C Max MK 1 - Years 2003-2010
Part: Instrument cluster

Remove the plastic cover behind the steering wheel by unscrewing the relevant screws. Using a Torx screwdriver, unscrew the screws that are now visible and secure the instrument cluster. Gently move the speedometer to slowly pull it out of its housing. Be aware that it must be pulled out from the top. Use a plastic lever (not metal!) to assist without scratching the plastics. Once the instrument cluster is out, disconnect the connector by pressing down on the tab with a flat screwdriver and pulling up the lever. Fit the new speedometer by reversing the process.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Change Light on a Ford C Max
How to Reset the Oil Change Light on a Ford C Max
Ford C Max (2010-2019 / MK 2) In this brief tutorial, learn how to reset the service light related to the engine oil change on a second-generation Ford C Max, produced from 2010 t…
Removal of the car radio of the Ford C-Max MK1
Removal of the car radio of the Ford C-Max MK1
Ford C Max (2003-2010 / MK 1) If we are dissatisfied with the quality of the audio system in the Ford C-Max, a first step to improve it is to replace the car radio with a model wi…
How to disassemble the airbag of the Ford C Max
How to disassemble the airbag of the Ford C Max
Ford C Max (2003-2010 / MK 1) Removing the steering wheel airbag on a Ford C Max model 1 car is a simple and quick operation to perform independently. Before proceeding with the r…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos