Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Lock and Module on the Ford Kuga

Model: Ford Kuga MK 2, C520 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Door lock

See other generations:
Video tutorial

In this video tutorial, you will learn how to dismantle the lock and its module on the Ford Kuga, both first and second generation, by following these simple steps. First, open the front door and start by removing the front door panel; to do this, unscrew all the fixing screws as shown in the video.

At this point, unscrew the side screws of the lock using a Torx screwdriver; then remove the handle lock. Now dismantle the internal module by disconnecting the electrical connector; just follow the video to the end for reassembly!


Updated on 24 April 2026 by ScegliAuto


Related tutorials

Opening the Bonnet of the Ford Kuga MK1
Opening the Bonnet of the Ford Kuga MK1
Ford Kuga (2008-2012 / MK 1, C394) If you need to work inside the engine bay of the Ford Kuga, follow these steps to open the bonnet. Stand in front of the grille, rotate the Ford badg…
How to Remove the Tailgate Panel of the Ford Kuga - Escape
How to Remove the Tailgate Panel of the Ford Kuga - Escape
Ford Kuga (2012-2019 / MK 2, C520) This brief and simple guide shows you how to dismantle and replace the panel or the internal trim of the tailgate of the Ford Kuga and Ford Escape. F…
How to Replace the Timing Belt on a Ford Kuga?
How to Replace the Timing Belt on a Ford Kuga?
Ford Kuga (2012-2019 / MK 2, C520) Hello, today you will replace the timing belt on your Ford Kuga. First, open the bonnet and remove the air filter assembly along with the engine cove…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos