Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to replace the Ford Focus airbag control unit?

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Control unit
Operation: How to replace the Ford Focus airbag control unit?

To replace the Ford Focus airbag control unit, you must first remove the protective plastic cap located on the side of the center console, near the glovebox. After removing the cap, it will be possible to remove the inner plastic panel from the side of the console. In this way it will be possible to unhook all the connectors connected to the control unit and loosen its fixing screws. When the device is free from connectors and screws, it can be removed from its housing. Once the control unit has been removed, it will be possible to replace it.


Posted on 6 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Focus 2011-2018 - Where is the ECU of the Ford Focus located? Read Answer
    • Focus 2018-2025 - Why can't I start the gearbox of the Ford Focus? Read Answer
    • Focus 2011-2018 - Where is the ECU located in the Ford Focus mk3? Read Answer
    • Focus 2004-2011 - What is the position of the ECU on the 2010 Ford Focus? Read Answer
    • Focus 2004-2011 - What is the position of the Ford Focus control unit? Read Answer
    • Focus 2018-2025 - Where is the ECU located on the Ford Focus 1.8 TDCI? Read Answer
    • Focus 2004-2011 - In which position is the ECU of the Ford Focus 1.8 TDCi? Read Answer
    • Focus 2011-2018 - Where is the Ford Focus ECU located? Read Answer
    • Focus 2004-2011 - What is the location of the 2004 Ford Focus ECU? Read Answer
    • Focus 2011-2018 - Where is the Ford Focus ECU located? Read Answer
    • Focus 2004-2011 - Where is the Ford Focus engine ECU located? Read Answer
    • Focus 2004-2011 - Where is the central locking unit located in the Ford Focus? Read Answer
    • Focus 2004-2011 - Where is the glow plug control unit located on my 2008 Ford Focus 1.6 TdCi? Read Answer
    • Focus 2011-2018 - Problems with start & stop on Ford Focus, what possible solutions? Read Answer
    • Focus 2011-2018 - Where are the fuses located in the Ford Focus Mk3? Read Answer
    • Focus 2004-2011 - How to access the ECU on Ford Focus 2? Read Answer
    • Focus 2018-2025 - How much does an electronic diagnosis in the Ford workshop cost? Read Answer
    • Focus 1998-2004 - Where is the Ford Focus central locking control unit located? Read Answer
    • Focus 1998-2004 - Where is the engine control unit of the Ford Focus 1.6 tdci? Read Answer
    • Focus 2004-2011 - Where is the Ford Focus central locking unit located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos